This solar charge controller will never work with a 12V solar array, even if it climbs to 20V with full sun, and even though this line of text was in The Cabin Depot’s web page for the product: Max PV Input Power: 780W (12V) / 1560W (24V) / 3120W (48V). The Cabin Depot offered to accept a return if I pay for the shipping costs. Just keep in mind, whatever you purchase from The Cabin Depot, that the customer pays shipping when they purchase the product, and when they return it. It will cost too much to travel to a shipping point and return it. I am extremely disenchanted with this seller, even though it stocks many useful items, not all of them are as they seem and the response is pretty rigid.

I installed it, and he is not User friendly. Worst installation and User guide I Never saw nothing like that. I regret buying it.

Here’s a clear, practical review of the **EPEver iTracer AN G3 60A MPPT Solar Charge Controller** based on typical real-world use, strengths, and limitations:

***

# 🔋 EPEver iTracer AN G3 60A MPPT Controller — Review

## ⭐ Overall Impression

The **iTracer AN G3 60A** is a **high-efficiency, feature-rich MPPT controller** aimed at serious off‑grid users. It delivers strong performance for medium-to-large solar arrays and is especially popular in DIY systems due to its flexibility and reliability.

***

## ✅ Pros

### 🔹 1. Strong Charging Performance

* Uses **advanced MPPT tracking** with efficiency up to \~99.5%.
* Consistently pulls maximum power from panels—even in partial shade or changing light conditions.
* Supports higher PV voltages (up to \~150V or more depending on model variant), allowing:
* Longer panel strings
* Reduced cable losses

👉 Bottom line: Excellent energy harvest compared to PWM or lower-end MPPT controllers.

***

### 🔹 2. High Current Capacity (60A)

* Handles **larger battery banks** comfortably.
* Suitable for:
* Cabins
* RV systems
* Small off-grid homes

👉 Works well with 12V, 24V, 36V, and 48V systems (auto recognition).

***

### 🔹 3. Reliable Build Quality

* Solid aluminum heat sink design
* Passive cooling (no fan → less noise and failure risk)
* Built to handle long-term continuous loads

👉 Most users report long-term reliability when installed properly.

***

### 🔹 4. Extensive Adjustability

* Fully customizable charging parameters:
* Bulk / Absorption / Float voltages
* Equalization settings
* Supports multiple battery types:
* Flooded
* AGM
* Gel
* Lithium (manual configuration)

👉 Major advantage for experienced users who want fine control.

***

### 🔹 5. Communication & Monitoring

* RS485 port for:
* MT50 display
* PC software (Solar Station Monitor)
* Remote logging systems
* Optional Bluetooth module available

👉 Great for users who want system visibility and data tracking.

***

### 🔹 6. Safety & Protections

Includes protections for:

* Overcharge
* Over-discharge
* Overload
* Short circuit
* Reverse polarity

👉 Adds confidence for unattended systems.

***

## ❌ Cons

### 🔸 1. Not Beginner-Friendly

* Setup menus and parameters can be **confusing**
* Documentation is decent but not always intuitive

👉 Expect a learning curve if you're new to solar.

***

### 🔸 2. No Built-in Display

* Requires:
* MT50 remote meter, or
* PC connection, or
* Bluetooth module

👉 Adds extra cost and setup complexity.

***

### 🔸 3. Bulky Size

* Larger and heavier than many modern compact controllers

👉 Not ideal for tight RV or van builds unless planned for.

***

### 🔸 4. Limited Native Lithium Support

* Works with lithium batteries—but:
* Requires **manual configuration**
* No advanced BMS communication

👉 Compared to newer smart controllers, lithium integration feels dated.

***

### 🔸 5. Software Feels Old-School

* Monitoring software is functional but:
* Not very modern
* Can feel clunky

***

## 🔧 Ideal Use Cases

This controller is best suited for:

* 🏕 Off-grid cabins
* 🚐 RV / van systems (larger builds)
* 🏡 DIY solar setups
* ⚡ Users running **high-voltage panel strings**

***

## ⚖️ Comparison (Quick Context)

| Feature | iTracer AN G3 | Budget MPPT | Premium (Victron, etc.) |
| --------------- | ------------- | ----------- | ----------------------- |
| Efficiency | ✅ Excellent | ⚠️ Varies | ✅ Excellent |
| Price | ✅ Mid-range | ✅ Low | ❌ High |
| Ease of use | ❌ Moderate | ✅ Easy | ✅ Easy |
| Monitoring | ⚠️ Add-ons | ❌ Limited | ✅ Best-in-class |
| Lithium support | ⚠️ Manual | ⚠️ Basic | ✅ Advanced |

***

## 🏁 Final Verdict

✅ **Buy it if you want:**

* High efficiency at a reasonable price
* A dependable controller for a larger system
* Full control over charging parameters

❌ **Skip it if you want:**

* Plug-and-play simplicity
* Built-in smart app experience
* Seamless lithium integration

***

## ⭐ Rating: **8.5 / 10**

A **powerful, reliable MPPT controller** that punches above its price—but it rewards users who are comfortable with more technical setup.

***

If you want, I can also compare it directly to something like a **Victron SmartSolar 150/60** or help you decide if it fits your exact solar setup.

Je l’utilise depuis quelques jours et ça va très bien stable bonne production tire 85% depuis quelques jours mes panneaux pour la date 📅 février 2026 super hâte au mois avril pour mais je suis confiant